Back
From: Slaven Rezić
Subject: FAIL NRD-Daemon-0.04 v5.24.0 GNU/Linux
Date: 2017-02-10T15:42:48Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Jose Luis Martinez Torres,
This is a computer-generated report for NRD-Daemon-0.04
on perl 5.24.0, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/opt/perl-5.24.0/bin/perl5.24.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/001_load.t ............... ok
t/002_serializer.t ......... ok
t/003_packets.t ............ ok
t/004_packserialized.t ..... ok
Using serializer: plain
Using writer: cmdfile
2017/02/10-15:11:11 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(24237)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/005_client.t .............
Failed 2/2 subtests
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: cmdfile
2017/02/10-15:14:41 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(24277)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/050_basic.t ..............
Failed 9/9 subtests
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: cmdfile
2017/02/10-15:18:03 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(24682)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/051_multiple.t ...........
Failed 9/9 subtests
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: cmdfile
2017/02/10-15:21:24 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(25095)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/052_simultaneous.t .......
Failed 18/18 subtests
t/070_spooling.t ........... ok
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: cmdfile
2017/02/10-15:24:45 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(25147)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/080_abuse.t ..............
Failed 9/9 subtests
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: cmdfile
2017/02/10-15:28:06 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(25544)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/081_timeouts.t ...........
Failed 15/15 subtests
2017/02/10-15:31:28 DummyServer (type Net::Server::Single) starting! pid(25956)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
2017/02/10-15:31:34 Server closing!
t/082_timeouts_client.t .... ok
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: resultdir
2017/02/10-15:31:34 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(25960)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/090_resultdir.t ..........
No subtests run
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: resultdir
2017/02/10-15:34:59 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(26009)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/091_resultdir_batched.t ..
No subtests run
Pid_file "/tmp/nrd.pid" already exists. Overwriting!
Using serializer: plain
Using writer: resultdir
2017/02/10-15:38:20 NRD::Daemon (type Net::Server::Single -> MultiType -> Net::Server::Single) starting! pid(26423)
Resolved [*]:7669 to [::]:7669, IPv6
Not including resolved host [0.0.0.0] IPv4 because it will be handled by [::] IPv6
Binding to TCP port 7669 on host :: with IPv6
Group Not Defined. Defaulting to EGID '1002 1002'
User Not Defined. Defaulting to EUID '1002'
t/092_batched.t ............
No subtests run
t/300failures.t ............ ok
Test Summary Report
-------------------
t/005_client.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/050_basic.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/051_multiple.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/052_simultaneous.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: Bad plan. You planned 18 tests but ran 0.
t/080_abuse.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/081_timeouts.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: Bad plan. You planned 15 tests but ran 0.
t/090_resultdir.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: No plan found in TAP output
t/091_resultdir_batched.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: No plan found in TAP output
t/092_batched.t (Wstat: 9 Tests: 0 Failed: 0)
Non-zero wait status: 9
Parse errors: No plan found in TAP output
Files=16, Tests=139, 1835 wallclock secs ( 0.15 usr 0.02 sys + 5.54 cusr 0.99 csys = 6.70 CPU)
Result: FAIL
Failed 9/16 test programs. 0/139 subtests failed.
Makefile:822: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Clone 0 0.38
Crypt::Blowfish 0 2.14
Crypt::CBC 0 2.33
JSON 0 2.90
Net::CIDR 0 0.18
Net::Server 0 2.008
Parallel::Forker 0 1.232
Scalar::Util 0 1.47
Test::Memory::Cycle 0 1.06
Test::Simple 0 1.302075
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.24
opt_requires:
Module Need Have
------------------- ---- --------
Crypt::Blowfish 0 2.14
Crypt::CBC 0 2.33
JSON::XS 0 3.03
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = en_US.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/cpansand/bin/linux-gnu:/home/cpansand/bin/sh:/home/cpansand/bin:/usr/games:/home/cpansand/devel:/home/eserte/src/srezic-misc/scripts
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 23834
PERL5_CPAN_IS_RUNNING = 23834
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 7566,23834
PERLDOC = -MPod::Perldoc::ToTextOverstrike
PERL_BATCH = yes
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_CPAN_REPORTER_CONFIG = /var/tmp/cpansmoker-1002/2017020921/cpanreporter_000_config.ini
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
SHELL = /bin/zsh
TERM = screen
TMPDIR = /var/tmp/cpansmoker-1002/2017020921
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl-5.24.0/bin/perl5.24.0
$UID/$EUID = 1002 / 1002
$GID = 1002 1002
$EGID = 1002 1002
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.14
CPAN::Meta 2.150010
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.24
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.24
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
JSON 2.90
JSON::PP 2.27400
Module::Build 0.4220
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.36
Test::More 1.302075
YAML 1.21
YAML::Syck 1.29
version 0.9917
--
Summary of my perl5 (revision 5 version 24 subversion 0) configuration:
Platform:
osname=linux, osvers=4.4.0-59-generic, archname=x86_64-linux
uname='linux prod3.bbbike.org 4.4.0-59-generic #80-ubuntu smp fri jan 6 17:47:47 utc 2017 x86_64 x86_64 x86_64 gnulinux '
config_args='-ds -e -Dprefix=/opt/perl-5.24.0 -Dcf_email=srezic@cpan.org'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='5.4.0 20160609', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/5/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.23.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.23'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Jan 15 2017 08:12:09
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="23834"
PERL5_CPAN_IS_RUNNING="23834"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="7566,23834"
PERLDOC="-MPod::Perldoc::ToTextOverstrike"
PERL_BATCH="yes"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_CPAN_REPORTER_CONFIG="/var/tmp/cpansmoker-1002/2017020921/cpanreporter_000_config.ini"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
@INC:
/opt/perl-5.24.0/lib/site_perl/5.24.0/x86_64-linux
/opt/perl-5.24.0/lib/site_perl/5.24.0
/opt/perl-5.24.0/lib/5.24.0/x86_64-linux
/opt/perl-5.24.0/lib/5.24.0
.